Applications: Aluminum SEU cable is primarily used as panel feeder in multiple unit dwellings and for branch circuits. Maximum operating temperature is not to exceed 90°C in wet locations. Voltage rating is 600 volts.
Construction:
Conductor - Aluminum SEU cable has a compact strand soft drawn 8000 series aluminum conductor, per ASTM B-801
Insulation - Aluminum SEU cable has a type XHHW-2 cross linked polyethylene (XLP) insulation. The conductors are cabled together with an aluminum alloy concentric neutral and covered with a reinforced binder tape.
Jacket - Aluminum SEU cable has a gray sunlight resistance polyvinyl chloride (PVC) jacket.
Standards: UL 44, 854 Federal Specification J-C - 30B Ampacities based on National Electric Code, 2005 edition, section 310-15 60°C when terminated to equipment for circuits rated 100amps or less or marked for 14ga through 1ga conductors 70°C when terminated to equipment for circuits rated over 100amps or marked for conductors larger than 1ga 90°C wet or dry locations For dwelling units, conductors shall be permitted at listed Ampacities to be utilized as 120/240 volt, 3-wire, single phase service conductors that supply the total load
Specifications*:
Insulated Conductor Size: 1/0 Bare Neutral Size: 2 Outside Diameter:0.647 inches Ampacity: 135 amps @ 90°C Net Weight:.387 lbs/ft
*Data provided on this page is subject to change based on different manufacturers variances.